View CXA-P10M-P_993027.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer's product name: dc/ac inverter unit cxa-p10a-p tdk product name: messrs : dwg.no. 2-15-7,higashi-ohwada,ichika wa-shi, chiba,272-8558 japan telephone : 047-378-9 671 fax : 047-378-9673 prepared by approved by authorized by tdk corporation corporate headquarters 13-1,nihonbashi 1-chome,chuo-ku, tokyo 103, japan telephone : 03-3278-5 111 r product drawing ctr-0745-b sep. 11 , 2005 h.mitsumoto sep. 11 , 2005 e.takahashi sep. 11 , 2005 k.hanabusa
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b 1 when using this product, give due consideration to the precautionary notes d escribed below and ensure a safe design. inappropriate use may result in electric shock, injury or fire. caution precautionary notes regarding the use of this inverter ? this product is designed for the lighting of a cold cathode fluorescent lamp. do not use it with any other l oad. ? store this product under the conditions defined in the specification document. ? do not store this product in an environment where dust, dirt or corrosive gas(salt,acid,base, etc.) is present. ? this product is subject to high voltage. if there is a possibility that the user may touch the product, provide a proper indication in order to draw the user's attention. ? this product is designed for use with general electronic equipment. if it is to be used with medical equipment that directly affects human life or for the control of transportation equipment to which passengers entrust their lives, provide thor ough fail-safe measures. ? avoid using this product under high temperatures or high humidity or in an environment in which dust, dirt or any corrosive gas (salt,acid,base, etc.) is present. also,be careful not to allow the formation of dew condensation. it may result in dam age or electric shock. ? if the product does not have a built-in protective circuit (circuit breaker, fuse, etc.), it is recommended that a fuse be used at the input stage to prevent the generation of smoke or fire in the event of a malfunction. even when the product has a built-in protective circuit (circuit breaker, fuse, etc.), the circuit may not function pr operly due to inappropriate operating conditions or power-s upply capacity. it is recommended that an appropriate protective circuit (circuit breaker, fuse, etc.) be provided separately from the built-in circuit. ? use the product only within the specified input voltage, output power, output voltage and operating temperature ranges. exceeding these values may result in dam age, etc. ? provide a measure for the prevention of surge voltage due to lightning, etc. abnormal voltage may result in damage, etc. ? to prevent problems arising from short-circuiting of the high-volt age section, provide appropriate measures to prevent the entry of foreign substances following installation. ? this product is not designed to provide resistance to radiation. ? ripples could be superimposed on the voltage and the current in the input source connected to the inverter , y depending on the impedance in the input source, wiring, etc. when you select an input source, please check waveforms, etc on the final set. handling pr ecautions ? this product uses thin wires. observe the following precautions and handle it with care so as not to cause wire breakage. broken wire may result in dam age, etc. y ~ do not stack multiple products on top of one another. y ~ do not allow the product to come in contact with tools, etc. ? do not apply excessive stress during installation. it may cause chipping and cracking,resulting in dam age, etc. ? provide a clearance of 2 mm or more between the high-voltage section of this pr oduct and the frame body on which the product is installed and also the conductor section (pattern , pad etc. ). ? please do not use the product, when dropping it, since there is a possibility of the parts dam age. please confirm abnormality is not found in the product enough when using it by any c hance. warning ? this product is subject to high voltage. do not touch it while the power is on. failing to do so may result in electric shock.
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b [1]outline 1-1. outline 1-2. connector configuration label (examlpe) tdk part no, date code, country of origin 5- 0.80.1 or 5- 0.640.07 30mm (a:high voltage generation area) (tin plated obstinate copper wire) (top view) gnd r1 r2 c1 j2 j1 t1 c4 out c5 vin f1 out1 out2 e b b e l1 q1 q2 gnd cxa-p10a-p lot. 3 made in japan 5min 15max 2max t1 (1.2) (1) (2) (3) 50.80.5 29max 10.16 10.16 0.2 0.2 56max 240.2 (6.5) 33.50.2 2.50.15 20.15 0.50.2 2-r10.1 (bottom view) (5) (4) jumper (side view) unit:mm weight:25.3g.typ. ~ the specifications may be changed wit hout any notice. ~ when placing orders, please confirm "specifications" or "product drawing" throug h tdk sales or distributors. ? features ? ~ this inverter is for one or two lamps. (changed by the c onnection.) ~ this inverter is the mount board. ~ this product is conformity to roh s directive.* * : conformity to rohs directive:this means that, in conformity with eu directive 2002/95/ec, yyyyyyy lead, cadmium, hexavalent chromium, and specific bromine-based fl ame retar dants, pbb yyyyyyyy and pbde, have not been used,except for exempted applications. *please secure the air clearance of 2mm or more from the high voltage generation ar ea up and down and right and left. y please refer to note1-4. for details. pin no. symbols rating notes connection vin gnd v high 1 v high 2 v low 5v 0v 400marms/5marms 0v 400marms/5marms (1) (2) (3) (4) (5)
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b for circuit connection, prefer to test circ uit diagram [4]. for operation in floating mode, please remove the jumper(j1) on top side of pcb that pin2 and pin 5. please use minimum of 2mm clearance (all directions) between inverter high voltage area and any conductors. please refer to mechanical drawing for marking of high voltage area. to prevent electrical discharge from high voltage area, please use non-conductive fastener in u m ounting hole. open voltage (strike voltage) is measured across the transformer secondary winding at no load a s the reading at the output connector would be less than the actual value. if the start up voltage falls below cold cathode tube strike voltage, the ccfl will not light up easily specially at lower ambient temperature. please review mounting instruction to avoid any abnormal operation due to c oupling/leakage capacitance of inverter high voltage area to any surrounding c onductor. for proper operation of circuit protection (fuse or ic protector), please use minimu m of 5a c apacity for input power supply. note2. note3. note4. note5. note6. note7. note8. note1-1. marking of tdk part no, date code, country of origin. 1) tdk part no., date code, country of origin, is marked on the si de of transformer. 2) date code example. (ex. apr. 2 005) 3) country of origin code example. (ex. japan. china). * : conformity to rohs directive:this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, hexavalent chromium, and specific bromi ne-based flame retar dants, pbb and pbde, have not been used,except for exempted applications. 54 last digit of producti on year. one digit of production month. (oct. : x , nov. : y, dec. : z). blank product conforming to rohs directive* identification sign r [2] absolute maximum ratings items symbols specification unit notes input voltage output power operating temp. r ange storage temp. range humidity r ange vin pout ta ts rh 0~6 9 -10~60 -20~85 95 vdc w c c %rh a maximum wet ball temperat ure is 38c
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b [3] electrical specifications items symbols conditions connection output current input current frequency open circuit voltage iout iin f vopen 50.05 60 1 235 vin [v] rl [k ] ta [c] 50.25 50~70 -10~60 unit specification marms adc khz vrms 9 - 32 1300 11 2.34 42 - 10 1.56 37 1500 min. max. typ. 8 12 10 50.05 100 2 235 -10~60 50.25 80~120 marms adc khz vrms 5.1 - 37 1300 6.5 1.35 47 - 6 0.92 42 1500 4.5 7.1 6 50.05 120 3 235 50.25 100~140 -10~60 marms adc khz vrms 4.3 - 32 1300 5.5 1.28 42 - 5 0.86 37 1500 3.8 6.0 5 iout1,iout2 iin f vopen 50.05 rl1=rl2=120 4 235 50.25 100~140 -10~60 marms adc khz vrms 4.5/4.5 - 32 1300 5.5/5.5 2.21 42 - 5/5 1.47 37 1500 4/4 6/6 5/5 output current input current frequency open circuit voltage output current input current frequency open circuit voltage output current input current frequency open circuit voltage iout iin f vopen iout iin f vopen ?
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b [4] test circuit connection test circuit notes 1 short of out1,out2 open of out1 or out2 2 4 short of out2,out gnd 3 note4-1.test equipments a v a v digital multiple meter(a dva ntest r6451a or equivalent) dc current meter(advantest r 6451a or equivalent) true rms meter(keithley 2001 or equivalent.) high frequency current mete r(keithley 2001 or equivalent) 1000:1 high voltage probe (tektronix p 3000 or equivalent) ~ ~ f frequency countor(adv antes t r6452a or equivalent) mjo ?
7jo 065 ?
065 ?
mpvu 3- " + " ? 7jo ?
(/% 7 ? 065(/% ?
' 2 mjo ?
7jo 065 ?
065 ?
mpvu 3- " + " ? 7jo ?
(/% 7 ? /$ 065(/% ?
' 2 mjo ?
7jo 065 ?
065 ?
mpvu 3- " + " ? 7jo ?
(/% 7 ? 065(/% ?
' 2 mjo ?
7jo 065 ?
065 ?
" + 7jo ?
(/% 7 ? mpvu 3- mpvu 3- " ? " ? 065(/% ?
' 2 5 5 5 5 $ $ $ $ $ $ $ $
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b [5] reliability test following test items are assured. 2h/div 60c 20c -10c items conditions -40c 96h -10c 96h load cond.:typ 85c 96h 60c 96h load cond.:typ heat shock humidity (non operati onal) vibration shock terminal strength heatresistance of solderling state of soldering the following 5 cycles, load cond.:typ 40c 90~95%rh 96h 10~55hz amplitude 0.35mm or 5g sweep:1min 30min each axis x,y,z 60g 6ms harf-sine pulse 1 time each axis x,y,z tensile:1kgf 10sec 260c5c 10sec 350c10c 3sec 230c5c 5sec judgement low temp.non operati onal low temp.operati onal high temp.non operati onal high temp.operati onal electrical and apperrance should be in the spec. thing that lead wire which solders and is extinguished is covered with new solder. electrical and apperrance should be in the spec.
no. materials name material remark product name or model,title dc-ac inverter unit cxa-p10a-p page name of drawing drawing no. product drawing tsb-08-01-05(00)form-6(a4) tdk corporation qu 7100 303-1 ctr-0745-b [6] packing and marking a shipping box is packaged to avoid from damage. following items are printed on the box. [7] others a normal test condition :temperature (2015c), humidity (6520%rh). one year after shipment.this covers any defects in material or workmanship. defective uni ts w ill be replaces at no charge. tdk and customer are to discuss changes,problems, and modifications and etc, when needed. packing style as under fig. (300 going in with a st andard.) styrofoam corrugated cardboard styrofoam 60pcs in one tray x 5trays =300pcs/one box (210mm) (480mm) (340mm) product packing box. tdk part no. cxa-p10a-p manufacture tdk customer part no. qty. inspection no. country of origin 6-1. 6-2. 6-3. 6-4. 6-5. 6-6. tdka part no. manufacture customer part no. qty. inspection no. countory of origin 7-1.test cond. 7-2.std warrantry 7-3. others

▲Up To Search▲

Price & Availability of CXA-P10M-P

	To Download CXA-P10M-P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .